Bell Press Dimmers

/Bell Press Dimmers
Bell Press Dimmers2018-05-18T11:38:10+00:00

Universal bell press dimmers

125W, 250W, 500W, 800W

Maximum loads vary by lamp

Shuttle universal bell press dimmers are separately switched, compact, modular dimming mechanisms rated at 125W, 250W, 500W and 800W.  They are designed for universal load compatibility. The units utilise powerful and sophisticated dimming technology to provide full control of almost any type of load.  The dimmers also incorporate overcurrent and over-temperature protection devices and are capable of withstanding persistent short circuit conditions.

Key Features

  • Dimming is to the lowest point
  • Suitable for one-way or two-way operation
  • Added surge protection
  • Minimum load is one lamp
  • No flickering
  • RC-driver compatible for LED’s that do not turn off completely
  • Locally manufactured under ISO conditions
  • SABS/NRCS approved, comply with EU CE, RoHS and Hazardous Materials directives, Australian SAA, RMA and C-tick requirements and ICASA mandatory requirements for conducted and radiated emissions

Bell Press Dimmer data sheet

9V to 48V DC LED

Shuttles DC dimmers dim up to 96 watts (8A/12V or 4A/24V) of incandescent, halogen or LED lighting.

Key Features

  • Familiar bell-press operation
  • For new custom installations or to replace an existing on/off switch to create low-light ambiance
  • Perfect for RVs, caravans, trailers, boats, cars, trucks, or anywhere 12 or 24 Volt DC power is present
  • Reduces heat and power drain on batteries
  • Fits in small spaces where other dimmers can’t
  • Dims “non-dimmable” constant voltage LED’s
  • Suitable for 12VDC and 24VDC strip LED’s
  • Suitable for some non-dimmable constant current LED drivers
  • Suitable for RGB or tunable white LED’s
  • Digital control provides accurate and flicker free dimming to very low intensity
  • No minimum load
  • Connect any number of DC dimmers to a single bell-press switch
  • Locally manufactured (ISO 9001:2008)

DC Dimmer datasheet

Master Zone Controller

Shuttle’s master zone controller is designed for simple individual zone control with a master override to synchronise all settings.

Key Features

  • Connect any number of Shuttle bell-press dimmers to one switch
  • Provides a master switch to easily synchronise and control multiple dimmers
  • Allows for individual control of connected dimmers to provide zone control
  • Locally manufactured (ISO 9001:2008)
  • Only for use with Shuttle Dimmers

Master Zone Controller datasheet

Leading edge bell press dimmers

125W, 500W, 800W

Maximum loads vary by lamp

Shuttle leading edge bell press dimmers are separately switched, compact, modular dimming mechanisms rated at 125W, 500W and 800W, and designed for some Gen.1 Philips GU10 LEDs and other specific LEDs.

The dimmers incorporate overcurrent and over-temperature protection devices and are capable of withstanding persistent short circuit conditions.

Key Features

  • Dimming is to the lowest point
  • Suitable for one-way or two-way operation
  • Added surge protection
  • Minimum load is one lamp
  • No flickering
  • 100% silent
  • Locally manufactured under ISO conditions
  • SABS/NRCS approved, comply with EU CE, RoHS and Hazardous Materials directives, Australian SAA, RMA and C-tick requirements and ICASA mandatory requirements for conducted and radiated emissions

Bell Press Dimmer data sheet

Contact Us

Phone: +27 (0) 21 448 8229

The easiest way to get our products