Mandatory and additional voluntary compliance testing

All Shuttle phase cut dimmers are tested against and comply with the following mandatory requirements (125W, 250W, 500W & 800W bell-press and rotary models)

EMC (SA and EU mandatory)

  • CISPR 15 (2018-05 ED.9.00): ‘Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment’
  • SANS 2332 (2017 ED.1.00) / CISPR 32 (2015 ED.2.00): ‘Electromagnetic compatibility of multimedia equipment – Emission requirement’
  • IEC 61547 (2009): Equipment for general lighting purposes – EMC immunity requirement
  • SANS 61000-3-2 (2009) / IEC 61000-3-2 (2009): Limits for Harmonic Current Emissions (Equipment Input Current ≤16 A per phase)
  • SANS 61000-3-3 (2009) / IEC 61000-3-3 (2008) : Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems – Equipment with rated current ≤16 A per phase
  • SANS 61000-4-2 (2009) / IEC 61000-4-2 (2008): Testing and measurement techniques – Electrostatic discharge immunity test
  • SANS 61000-4-3 (2008) / IEC 61000-4-3 (2010): Testing and measurement techniques – Radiated, radio-frequency, electromagnetic field immunity test
  • SANS 61000-4-4 (2011) / IEC 61000-4-4 (2011): Testing and measurement techniques – Electrical Fast Transient / Burst
  • SANS 61000-4-5 (2006) / IEC 61000-4-5 (2005): Testing and measurement techniques – Surge immunity test
  • SANS 61000-4-6 (2009) / IEC 61000-4-6 (2008): Testing and measurement techniques – Immunity to conducted disturbances, induced by radio-frequency fields
  • SANS 61000-4-11 (2005) / IEC 61000-4-11(2004): Testing and measurement techniques – Voltage Dips, Short Interruptions and voltage variations immunity test.

Safety and Performance (SA and EU mandatory)

  • IEC 60669-1: 2017 / SANS 60669-1: 2017
  • IEC 60669-2-1: 2015 / SANS 60669-2-1: 2015

CE/EU Conformance (EU mandatory)

  • Directive 2014 / 35 / EU – Low voltage directive (LDV)
  • Directive 2014 / 30 / EU – EMC directive (EMCD) in conjunction with directive 89/336/EEC as amended with 91/31/EEC

AS/NSZ Conformance (AS/NSZ mandatory) – all Shuttle bell-press dimmer models

  • AS/NSZ 60669-1: 2013
  • AS/NSZ 60669-2-1: 2013
  • SGS-190520-EA
  • SGS-190521-EA

Shuttle SDIM-T-LED-500W complies with the following voluntary requirements

IEC EMC (voluntary)

  • SANS 61000-4-4 (2011) / IEC 61000-4-4 (2011): Testing and measurement techniques – Electrical Fast Transient / Burst immunity.
  • Live to Neutral: Tests were executed with
    • Mandatory test level
      • +1kV and -1kV interference signal amplitudes for a 60 second period for each polarity.
    • Over tests levels
      • +2kV and -2kV interference signal for a 60 second period for each polarity
      • +3kV and -3kV interference signal for a 60 second period for each polarity
      • +4kV and -4kV interference signal for a 60 second period for each polarity
      • +4.4kV and -4.4kV interference signal for a 60 second period for each polarity
      • +4.8kV and -4.8kV interference signal for a 60 second period for each polarity
  • SANS 61000-4-5 (2006) / IEC 61000-4-5 (2005): Testing and measurement techniques – Surge immunity test
    • Mandatory test level
      • Live to Neutral ± 1kV
    • Over tests levels
      • Live to Neutral ± 2kV
      • Live to Neutral ± 3kV
      • Live to Neutral ± 3.5kV

Supply Voltage Increase (Not a standard test method)

  • Continuous over-voltage of a maximum level of 280VAC on the power input for 5 minutes

Load Short Circuit (Not a standard test method) – applies to all dimmer models

  • Continuous short circuited load. Dimmer resumes normal operation after removal of the short circuit

Shuttle 96W DC bell-press dimmer is tested against and comply with the following mandatory requirements

EMC (mandatory)

  • CISPR 15 (2018-05 ED.9.00): ‘Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment’
  • SANS 2332 (2017 ED.1.00) / CISPR 32 (2015 ED.2.00): ‘Electromagnetic compatibility of multimedia equipment – Emission requirement’
  •  IEC 61547 (2009): Equipment for general lighting purposes – EMC immunity requirement
  • SANS 61000-4-2 (2009) / IEC 61000-4-2 (2008): Testing and measurement techniques – Electrostatic discharge immunity test
  • SANS 61000-4-3 (2008) / IEC 61000-4-3 (2010): Testing and measurement techniques – Radiated, radio-frequency, electromagnetic field immunity test
  • SANS 61000-4-4 (2011) / IEC 61000-4-4 (2011): Testing and measurement techniques – Electrical Fast Transient / Burst

Safety and Performance (EU mandatory)

  • IEC 61347-2-13: 2014 / AMD1: 2016 used in conjunction with IEC 61347-1: 2015

CE/EU Conformance (EU mandatory)

  • Directive 2014 / 35 / EU – Low voltage directive (LDV)
  • Directive 2014 / 30 / EU – EMC directive (EMCD) in conjunction with directive 89/336/EEC